Cleaning And Preservation Of Woodwind Instruments

Cleaning and maintenance of woodwind instruments is of great importance few musicians are aware of.A common woodwind instrument can be decreased to a quarter of its lifetime if not receive necessary treatment.Here is a general overview over simple maintenance for the most common instruments.

Mouthpieces

Because of condens,food,candy etc. every mouthpiece is exposed for rust and other less attractive coating on the inside.Therefore , it is important to clean regularly.The mouthpieces is decisive for the sound in the instrument and if this is bad the sound get bad.Watch out for notches or other small errors on the mouthpiece,while this can harm lips or destroy the pitch.
Mouthpieces of brass instruments should be put in lukewarm soap water and cleaned with a small bottle brush or pipe-cleaner.The best option is of course to get a mouthpiece brush.
Mouthpiece of woodwind instruments shall not be cleaned,but only be dried with a cloth.Make sure the chamber under the chip is clean,and dont damage/scratch.Musicians should themselves provide new chips.

Flute

Flute for sale is also a woodwind instrument, even if most flutes today consists of metal.The flutes have matching flaps as saxophone and clarinet and demands proportionate caution and maintenance.Its stricktly prohibited try and repair something by yourself if you are not an expert.

Clarinet

A clarinets selmer for instance demands the same measures as for saxophone, but are maybe even more exposed for damages if you do not make sure to dry out the instrument entirely,especially in the winter time.Remember ,a clarinet is made of wood which is influated of dry and moist air.A clarinets selmer must never be put in a bath.All adjustment,lubrication and repair must be done by a workshop or an expert.

Saxophone

Alto sax yamaha for instance consist of a significant number of moving parts and they are very exposed for damages.It is important the instrument is dried through after every session.On all the flaps there is small pillows.These dries out over time and must be replaced.It is important you do not give the instrument a bath,because the pillows might loosen or be destroyed.All adjustment,lubrication and repair ,must be done by an expert or a workshop.

Buying woodwind instruments online demands extra maintenance as you do not know how the previous owner has treated his/hers instrument.

Staying Fit With Golf As Your Sport

There are people who, although they want to get into a fitness activity, are reluctant to play any sport because they’re worried that their body may not be able to meet the demands of playing a particular sport. This perception could be because most of the sports they see on TV, such as basketball and football, require a lot of stamina and endurance. However, there’s one sport that doesn’t require much stamina but can still be an excellent fitness avenue, and that is the sport of golf.

Golf is generally perceived as a sport of leisure and is not really recommendable for those who want to keep fit. However, this sport can actually provide excellent physical benefits. Here are some of them:

Workout for the heart and lungs – Some people may not be aware of it, but a full day on the green once a week can actually provide a good workout for your heart as well as your lungs. If you walk the full distance going from hole 1 to 18, it can get your heart moderately pumping. You don’t have to have the stamina of professional athletes to do that, but it still gives the vital organs mentioned earlier a nice workout.

Calorie-burning – It’s true that golf is not a very physically demanding sport, but it can still help you in your goal of burning calories, which can help in losing or maintaining weight. Just by playing a 9-hole course (which entails some walking and carrying your bag) can already burn more than 700 calories. You do that twice every week and you can rack up a total of 1,400 calories burned weekly.

Stress-buster – For people who are already in their 50s or beyond, stress can be very debilitating. Playing golf can help reduce stress while you stay fit at the same time. It can also be an excellent outlet for social interaction, which can help you forget about stressful thoughts.

Lower risk of injury – Although all physical sports carry with them varying levels of injury risks, golf is considered (and is quite obvious) as among the sports that have the lowest in the area of risk for injury. Even if injuries do come, they’re not as major as those from more physically demanding sports. That’s a win-win situation for those who want to stay fit but don’t want to engage in more injury-prone sports.

Get into this sport now and start enjoying its physical benefits minus the high risk for injury.

The Dramatic Effects Of Black And White Portrait Photography

Black and white portrait photography is very popular because it adds an air of elegance and drama to the images. Black and white portraits impart rich and timeless appearance. Without the hindrance of colors, the viewer focuses on other elements of the photograph. The lack of color allows texture and form to become more significant features of the portrait.

An uncluttered look and simplicity adds a polished look to the portrait. Black and white portrait photography is an excellent way to add a classic and romantic feel to your photographs. It adds an air of nostalgia to portraits and evokes reminiscence of a time prior to color photographs, when all portraits were black and white.

There are a lot of people who consider black and white portrait photography to be an artistic form of expression. They believe that black and white portraits are more of a fine art than color portraits. Black and white photographs contain a distinct sophistication, summoning memories of a bygone era.

They soften facial features and capture the delicacy of shape and contour. It is often suggested that black and white portraits look best displayed in silver, anything antique is especially effective. Displaying new modern black and white portraits with heirloom family portraits is an excellent way to incorporate the past with the present for the preservation of the family’s heritage.

Black and White Portrait Photography is the Preference of Some Photographers

Some photographers are so impressed by the beauty of black and white photography that they specialize only in the photographing of black and white photographs. Many of them believe that the elegance and emotion of occasions like weddings are best captured by the art of black and white portrait photography.

Newborn baby/family portraits done in black and white can have an exceptionally dramatic effect. A uniform background and clothing color can focus attention on the baby and the family’s loving gaze and embrace become a more impressive and inspiring image, symbolic of their family’s love and devotion.

Though some photographers still prefer traditional film processing, most of them utilize modern digital cameras. Digital portrait photography allows for greater versatility. The majority of black and white portraits are originally shot in color.

State of the art technology can then be used to manipulate the photographs to convert them to gray scale. Specialized software is used to erase imperfections, lighten tones, and deepen shadows allowing for flawless, exquisite black and white portraits.

Oil Sands Technology An Overview

In simple terms heavy oil is any type of unrefined crude oil that is very thick and viscous to flow by itself easily. A kind of thinner is needed to be used to make the heavy oil flow. The thinner is called as diluents and allows the diluted oil to flow freely through the pipelines of an oil refinery. Heavy oil extraction is known more popularly as . The largest deposits of oil sands are found in Canada as well as over 30 countries the world over. The key energy supply of heavy oil is called as oil sands, tar sands or energy sands. These oil sands are utilized in order to extract the heavy oil throughout the world.

Conventionally the production of oil sands consisted of strip mining wherein the sands that contained oil bearing substance called Bitumen, were dug up in enormous measures uncovering the land. This bitumen was then injected with hot steam water to be separated from heavy crude oil and the sand byproduct. This technique of oil extraction was criticized by environmental groups as wasteful and destructive. Since land was dug up and then natural gas was used to heat the water. The method of oil extraction was condemned as too resource intensive and expensive process.

But recently new oil sands extraction technologies have been developed which enables the reduction of both water and natural gas use. New technologies like Electro Thermal technology and Solvent Extraction technology are easier and reduce green gas emission. Importance of Utah oil sands is on rise today as larger part of world depends on this natural resource for their fuel consumption needs.

The petroleum products distribution is carried out at MCW’S patented oil sands extraction technology. MCW Oil Sands Recovery is an LLC owned as a patented, environmentally-safe, continuous flow closed-loop technology that specializes in the extraction of oil from an extensive range of oil and other hydrocarbon sediment types.

The technologies from MCW Energy Group can be successfully applied to “water-wet” deposits like oil sands projects in Alberta, Canada as well as to the “oil-wet” deposits like the resources usually found in Utah. This is a distinctive technology that can be applied even in the remote desert areas where water is scarce as no water is used during the entire process. The total process is safe and free of greenhouse gas production making it widely acceptable. This oil sands technology does not require high temperature during the process in addition to being proficient of extracting 99% of all hydrocarbon content.

What Are The Different Kinds Of Designer Salwar Kameez

The great thing about Designer Salwar Kameez is that it does not always just blindly follow the usual norms of the basic salwar kameez dresses. These are often very stylishly and creatively designed , and are often inspired by not just the Indian fashion but also the styles and cuts of the contemporary French, Victorian, Russian , etc to create new looks on Salwar Kameez that have never been seen before. So if you are somebody who is daring enough to try out outfits that stand out of the rest of the crowd and beats the usual fashion norms of the season, here are some styles to watch out for!

One of the really exciting styles in Designer Salwar Kameez that you must try out is the use of overcoats and jackets (even cropped) jackets on the regular salwar kameez styles. These jackets and coats are very common on anarkali style Salwar Suits, but you can try to search for them in Patiala and churidar styles too. It looks cute and funky and adds a very individualistic taste to your style! For a majestic look stick to the velvet and silk dresses , with long flowing kurtis and feminine leggings and accessorize your outfit by just putting on an expensive designer dupatta that you can wear with a lot of grace. You can easily find such combinations if you buy Salwar Kameez Online.

Also a lot of designers these days are opting for asymmetrical cuts and hemlines which do not quite resemble the normal conventions of salwar kameez and have been associated more with the modern party dresses etc. If you are looking for something really modern, find out if you can get these asymmetrical cut dresses in an off shoulder, or poncho type design, or something that looks like a kaftan-mix- tunic type Shalwar Kameez!

A lot of designers are also opting for Indian Salwar Kameez styles that have been directly inspired from the 80s style and they use lots of colors, knotted up laces and puffed sleeves! The dupattas are worn as normal stoles and may be designed in simple and colorful patterns. This is the complete opposite of the royal anarkali style salwar kameez, which is why it really works when you need to refresh peoples senses with your style! If you can carry off bright colors with confidence, and love Patiala dresses, then you should definitely give these kinds of Designer Salwar Kameez a thought.

Rock Concert DVD to Give Ecstasy to Play Lovers

Music is essence of life. For some people, it gives pleasure and for some it’s bliss. For some people it’s lifesaver and for some it’s simply just life. That’s why people go to a concert to enjoy the act of their favorite musicians. Going to a live concert show might be a dream for many and seeing their favorite artist’s performing live in front of their eyes no barrier between them and you. You can just watch them performing. Whenever a live show is organized, people of large number come to the place and the place become jam-packed. Numerous people tend to enjoy visiting live concert shows only to see their favorite artist performing their favorite song. Those, who don’t get any chance to watch the show live, they can get the recording videos of the concert.

Visiting a live show is a different experience, listening them singing the songs are just amazing. But sometimes, people don’t get the chance, for which they can get Rock Concert DVD from the authorized company. In these DVDs, all the real time shows are recorded, so that people can enjoy their shows. Live rock concerts are just amazing for those who love music and enjoy it the most and it is also a popular form of entertainment that is growing rapidly. All the entertainment you can get sitting at your home. These rock concerts are held at different location and venues depending on the type of music being played, and it’s not possible for a person to travel to see the concert all the time. That’s why the DVDs act great for them.em.

To watch a live show you have to buy a ticket for it, which you can’t get in right time. These tickets are also normally very expensive. That’s why to save time and money you can purchase Classic Rock Concert DVDs from authorized company. Every band or individual does not have the same fan base and therefore there are some bands who are more famous than some bands and that is not much famous and hence having a small fan base. These bands always perform in stadium, because the traffic is always very difficult to control because of abundance quantity. Traffic is another reason that hassles people a lot and they why they should prefer the recorded video and enjoy with their friends and family by watching it.

Watching it live or watching on DVD, both of them have their own benefits. When you watch it on Rock Concert DVD, you get multiple views of the same thing and get the freedom to watch it again and again, no matter how many time you want. So, people who want to buy such videos of their favorite concerts can contact the officials of the company. All the information about the price and products are given in the website and people can access all the information for free.

Do Pitbulls Get Along With Kids

I often get asked if pitbulls are good with kids, and the answer in short is yes.

But just like with any breed of dogs there are some basic rules you need to follow. Here are 5 basic things to consider about your dog and kids.

1) Always supervise interaction between pit bulls and kids

NEVER leave a child alone with a dog. This goes for any dog. Even if it’s a puppy. This is for both the child’s and the dogs safety.

If you read through articles of pit bull attacks online where children were hurt, maimed or worse, killed by a Pit Bull you will notice that in 99% of the cases they were left alone with the dog or dogs involved.

This should be a rule rather than a tip. Use common sense and care. Small children especially should never be unsupervised around dogs.

2) Watch the child’s behaviour

Watch the children’s behaviour. This tip is more for the dogs safety than the child’s. Children can be brutal and even in the face of such harsh treatment, well bred, responsibly owned Pit Bulls are not prone to biting or “attacking” in defense.

Make sure every child that plays with your dog understands how to behave around them. They should know to respect your dog and it’s space and other things like toys, food, water, or their special bed.

3) Make sure all your dogs prized items are put away

Ah, nothing like a kid running around with a dried bully stick in their hands. lol. Not only is this nasty, your dog will want their bully stick back and attempt to get it. And in the process they could nip a finger or two.

Put all your dogs favorite toys and treats away and where children can’t get a hold of them to be on the safe side.

To clarify, it wouldn’t’ be out of malice or viciousness the dog would get a finger or two. It would be by accident, an accident that can easily be avoided by putting such things away.

4) Start taking Obedience classes

If you’re not already training your dog in basic obedience. Start as soon as possible.

Having an obedient Pit Bull will help when kids are around. Not to mention adults as well.

Teaching your dog to sit so they can be pet, laying down when things get a bit to rowdy, or to do a silly trick to lighten the tension of an over cautious parent is always a great idea.

5) Never Force your dog into a situation that makes them uncomfortable

Some dogs simply get weird around certain people. Don’t force the issue and make your dog say “hello” or play with someone they are showing signs of apprehension around.

Honestly, there is no reason to think that the pitbull is more dangerous with kids than any other dog. There’s no problem with pitbulls and kids.

Top 3 Cities to Become an Actor

How to Become an Actor: Moving to Los Angeles

In your quest to become an actor there will come a time when you consider moving to Los Angeles, CA. This is an obvious choice because Los Angeles has been known by many generations as the home of the film industry. However, over the past decade there are many other cities that are becoming film centric. You can visit these cities and find film projects taking place, agencies, casting studios, many directors and producers live in these cities and you actually have a great chance to become an actor.

1. Austin, TX:

Becoming an actor in Austin, TX can be an awesome experience. Austin is an enormous cultural melting pot that is home to film festivals and theatres. Some of the theatres include The Paramount Theatre, Arts on Reel, and The Salvage Vanguard. There is also a large amount of musical and entertainment culture in the city. You can move to Austin and should not have an issue finding a job there while being able to pursue your acting career.

2. New York, NY:

Becoming an Actor in NYC is a tremendous challenge and there are a ton of pro’s and con’s when moving to the Big Apple. First, NYC is very expensive. You can expect an average daily increase on everyday expenses of about 20%. Second, NY is the one of the most competitive landscapes in the film industry. New York is one of the busiest homes to casting calls, auditions, and film industry networks. While NY provides you with the best opportunities, you will need to be very prepared financially and mentally before moving there.

3. Los Angeles, CA:

Los Angeles, The City of Angels…..After you arrive in this city the 1st thing that you are going to realize is that it does not seem like a city. Everything that you are looking for is sprawled out and hard to reach. You can’t go anywhere without a car and you are guaranteed to sit in traffic at some point during the day. If you are going to pursue an acting career Los Angeles is the place to be. L.A. is home to the most agents, casting calls, directors, studios, and network of film industry professionals. L.A. has its own personality that has grown from the movie industry and no matter how many other cities become great cities for an actor L.A. will always take the cake.

History of Coffee: Part IV – Commercialisation of Coffee

For many connoisseurs, the period from the mid-19th Century to the late 20th Century is the ‘Dark Age’ of coffee. During this era, coffee lost its Middle-Eastern mystical charm and became commercialised and, quite frankly, ordinary.

When coffee was first introduced into Britain during the 17th Century, it was a drink enjoyed by every social class. While the rich would enjoy coffee almost ceremonially in their social clubs, the poor saw coffee as an essential nutrient, a hot drink to replace a hot meal, or hunger suppressant. It was only a matter of time, with the advancement of technology, that large companies would form to take advantage of the coffee commodity.

Traditionally coffee was roasted in the home or in the coffeehouse. A practice imported from the Middle-East was to simply stir-fry green beans in an iron pan over a fire till brown. Some coffeehouses used a more sophisticated method of a cylindrical unit hung above a fire with a handle to rotate the beans inside. Both these methods were only capable of roasting small batches of coffee, a couple of kilos or several pounds at most, which ensured that the coffee was always fresh.

However, with the onset of the industrial revolution and mechanisation, coffee roasting technology soon improved. Commercial coffee roasters were being invented which were capable of roasting much larger batches of coffee. It was now possible for the few to meet the coffee needs of the masses.

It was in the United States where coffee initially started to be commercialised. In 1865, John Arbuckle marketed the first commercially available packages of ground, roasted coffee. His brand, ‘Ariosa’, was sold over a far larger area then any other coffee roaster. Instead of being confined to a small area close to his roasting factory, Arbuckle was able to establish his coffee as a regional brand. Others soon followed suit and, by World War I, there were a number of regional roasters including companies such as Folgers, Hill Brothers, and Maxwell House. These companies offered customers consistent quality and convenient packaging for use in the home, but at a price: freshness. It could be several weeks, or even months, before the end product would reach the customer.

One approach to prolonging the freshness of roasted coffee was to glaze it with a glutinous or gelatinous matter. After the coffee beans had been roasted, a glaze would be poured over them, which would form a hard, protective barrier around the bean. Once such glaze patented by John Arbuckle in 1868, consisted of using: a quart of water, one ounce of Irish moss, half an ounce of isinglass, half an ounce of gelatine, one ounce of white sugar, and twenty-four eggs, per hundred pounds of coffee. Arbuckle experimented with many different glazes over the years, eventually settling on a sugar based glaze. In fact, Arbuckle became such a prolific user of sugar that he entered into the sugar business rather then give a profit to others for the huge quantities he required.

So why were customers willing to buy this coffee? Once ground, coffee quickly loses its flavour and therefore should be consumed as soon as possible (at the very latest within 48 hours). But this was the age of the brand, where consistency ruled king over quality. Local roasters would often produce excellent coffee, but they could also produce foul coffee, occasionally containing a number of adulterations. Customers wanted to trust what they were buying. They wanted their coffee to taste exactly the same, time and time again.

The first coffee brand to come to Britain was Kenco. In 1923, a co-operative of Kenyan Coffee farmers set up a coffee shop in Sloan Square (London), called the Kenyan Coffee Company, to distribute high quality coffee beans around Britain. Their shop proved very popular and their brand of coffee (renamed Kenco in 1962) soon spread throughout the UK.

Worse was to come to the brew known as coffee. As regional roasters grew into national roasters and then into international roasters, their pursuit of profit intensified. Traditionally coffee came from the ‘arabica’ variety of coffee bush. But in the 1850s, the French and Portuguese began to cultivate a different variety of coffee bush, known as ‘robusta’, on the west coast of Africa between Gabon and Angola. Robusta beans were (and still are) cheaper then arabica beans as they are easier to grow and have an inferior flavour. Coffee roasters looking to minimise their production costs started blending robusta beans with arabica beans in increasing quantities. They also used shorter roast times, to reduce weight loss stopping the coffee from fully developing its complex flavour.

However the lowest point for coffee comes with the introduction of instant coffee – a drink bearing little resemblance in taste to actual coffee. Although the first commercially produced instant coffee, called ‘Red E Coffee’, invented by George Constant Washington, an English chemist living in Guatemala, was marketed in 1909, it is Nestlé who are generally attributed with the invention of instant coffee. In 1930, Nestlé were approached by the Instituto do Café (Brazilian Coffee Institute) to help find a solution to their coffee surpluses. They believed that a new coffee product that was soluble in hot water, yet retained its flavour, would help stimulate World coffee sales. After seven years of research and frequent tasting, scientist Max Mortgenthaler finally achieved the desired results and, on 1st April 1938, Nescafé was launched, first in Switzerland and then later in Britain.

Some claim that it was the introduction of commercial television in 1956 that acted as a catalyst to the success of instant coffee in Britain. The commercial breaks were too short a time in which to brew a cup of tea, but time enough for an instant coffee. There is probably some truth to this claim as, by the 1960s, the majority of the tea industry started producing tea bags, an invention by Thomas Sullivan over half a century earlier (1904). Tea bags were seen as more convenient, simpler and quicker to use then traditional loose leaf tea and so could compete against instant coffee.

The coffee industry soon realised the association between commercial breaks and coffee drinking and started investing heavily in television advertising. Probably the most famous series of coffee advertisements were made for Nescafé Gold Blend. First aired in 1987, these advertisements focused on the sexual chemistry between a couple, played by Anthony Head and Sharon Maughan, acted out in a mini soap opera. The advertisements gripped the whole nation, featuring as frequently as Eastenders or Coronation Street as topics of conversation. This original series of advertisements ran for ten years, increasing sales of Gold Blend by 40% in the first five years (there were two further, less successful, sets of advertisements with different actors). Such was the profile of these advertisements, that they even featured as a news article on the ‘News at Ten’.

With the coffee industry focused on price rather then quality, it was little wonder that coffee sales became stagnant. Coffee drinking was now more about a caffeine fix rather then about savouring the taste, to be drunk in a break from work, rather then to be enjoyed over conversation or while reading the newspaper. Unsurprisingly the younger generations born in the 70s and 80s turned their back on bitter coffee, preferring sugary soft drinks such as Coca Cola and Pepsi for their caffeine kicks.

Native Instruments Audio 2 Dj Usb 2.0 Interface – Size Does Not Matter

Native Instruments has always lived up to the expectations of people in providing great software. But today, they are also becoming more and more popular for creating great hardware, especially when it comes to computer audio and USB audio interfaces. And with their latest product, the new Audio 2 DJ USB 2.0 Interface, they are about to prove themselves great once again.

The Audio 2 DJ will surely feed any digital DJ’s craving for high quality, extremely mobile audio interface whether they are using TRAKTOR or other DJing and performance software. Native Instruments did make a statement with this one – it is the smallest DJ USB soundcard in the world, BUT still has the enough punch to shake the world’s biggest clubs down.

Struggling entry level DJs who are looking for the ultimate portability possible for an audio interface without compromising audio quality will find their prayers answered with the Audio 2 DJ. And if you are a digital DJ who does not really need audio recording or time code control, then you got everything that you need with the Audio 2 DJ.

One great thing about the Audio 2 DJ is that, you can practically hook it up in any computer as long as you have a USB 2.0 cable. Its two quarter inch output channels also provides flexibility since it can either be used to route stereo signals to an external mixer, or as a master out and headphone monitor when using the internal mixer of your existing performance software. All you will need is your laptop, and the Audio DJ 2 USB 2.0 is good to go!

If you are thinking that because it is so small, it must have cut its corners in the sound quality department, well you are wrong. You will be amazed that Native Instruments guarantees super high end Circus Logic AD/DA converters. That means you get ultra low latency drivers, hi gain output levels (reaching up to 9.7 dBu on both channels) as well as ultra wide frequency response despite the extremely portable size of the Audio 2 DJ! So, even when you are holding the smallest USB audio interface in the world, you will get uncompromised sound quality and clarity with every detail of your music.

Size is not an issue with the new Audio 2 DJ USB 2.0 Interface from Native Instruments. Having a size no larger than a deck of cards, this bus-powered audio interface literally fits in a pocket and still can accommodate even the most demanding club systems. It houses a new balance of quality, size, and price. So go and get the Native Instruments’ Audio 2 DJ USB 2.0 Interface, today!